Directions for Use. Engines - Add 8 oz. of MT-10® to 4 to 6 quarts of oil in the crankcase every oil change.For larger engine oil reserves, add 1.5 oz. of MT-10® per each quart of oil.. Automatic transmissions - Add 8 oz. of MT-10® to transmission through fluid tube.For large transmissions, i.e. Allison, add 1.5 oz. of MT-10® per each quart of fluid.. MT-10® is a blend of highly refined oils and proprietary additives and contains no solid lubricants, chlorinated solvents or phosphate compounds. It is engineered to treat the metal not the oil using tribologic methods that improve metal surface characteristics to increase lubricity and load-carrying capacity.
_2fd5b6ac-46b2-11ed-95fc-fa163e794ba5.jpg "MT10 EFFIのすゝめ｜その他｜お店ブログ｜九州スズキ販売株式会社 久留米支店")
The short answer is no, Muscle Metal Treatment MT-10® will not cause your engine to leak oil. The product is compatible with the seals, and the properties of MT-10® are like motor oil.However, there have been RARE cases in which leakage occurred after adding MT-10® because there was a LARGE AMOUNT OF SLUDGE in the engine.Once MT-10® began working in the system, it slowly removed the sludge.. MT-10 Transmission is an anti-friction additive designed to address extreme-pressure areas, such as gear systems, along with bushings, bearings, and shafts. Key Features and Benefits:. Not a fan of oil additives but thought i would give it a try, have a 2004 ford freestar 104,000 miles trans mission has a hard 1-2 shift and reverse is slow.