Connect your computer or mobile device to your MG8725 using one of the following methods: a. Connect via WiFi using the SSID and WiFi password on the bottom of the MG8725. b. Connect via one of the ethernet ports found on the back of the MG8725. Confirm that your MG8725 is connected to the internet by visiting a website.. 3. Plug the MG8725 into a power outlet using the power adapter. 4. Wait for the online light ( for 3.0, or for 3.1) to stop lashing and remain on for at least 1 minute. This process may take up to 15 minutes and the modem may reboot multiple times. Note: You may use a coax splitter to share the cable connectivity with your TV.
Try connecting your MG8725 nearer to where the coaxial cable comes into your home. This lets you see whether your home's cabling is a problem. If you're using a splitter with your MG8725, try the MG8725 without the splitter to see if that helps. If it does, you may need to get a better splitter, one with a top frequency of at least 1,675 MHz.. • Place the MG8725 in a central location for the best wireless coverage throughout your home or office. • Try to avoid interference by keeping the MG8725 away from large electronics and cordless phones. • Use the motosync app to change the wireless channel to reduce interference with neighbors' wireless networks.