Lasko ProCeramic Utility Heater with Pivot Power Home

To reset a Lasko heater, please make sure the unit is powered off, unplugged from the wall and leave it that way for 10-15 minutes. After that time elapses, please plug the unit back into another outlet, ideally in another room to see if that resolves the issue. If not, please check reach out to a Customer Support Specialist for assistance.. To reset the Lasko Digital Ceramic CC13700 heater if it is not functioning properly, follow these steps: 1. Unplug the heater and wait for at least 10 minutes to allow it to cool down. 2. After the heater has cooled down, plug it back into a 120V~ electrical outlet. 3. Follow the operation instructions described in the manual to turn on the heater.

Considering the New York Times highly recommends the Lasko 754200 Ceramic Heater for their 2022 list of best space heaters on the market, it's safe to say that Lasko makes a good product. Lasko, as a brand, tends to take safety and quality very seriously for all of their HVAC systems and has a loyal customer fanbase, which speaks for itself.. 2. After the 10 minutes, plug the heater back in. 3. Follow the operation instructions in the manual to turn the heater on and set the desired settings. By resetting the heater, it should resume normal operation. If the issue persists, it is recommended to contact Lasko's Technical Assistance at 1-800-233-0268 for further assistance.