Kubota UDT or Super UDT: Front axle oil type: Gear lube SAE 80, SAE 80W-90: Service Intervals: Check hydraulic/transmission fluid level: Every 50 hours: Check front axle oil level: Every 50 hours: Lubricate axle hub bearings: Every 50 hours: Clean primary engine air filter element: Every 100 hours:. Some Kubota front axles require using grease rather than oil. Grease is a semi-solid lubricant usually applied to plug holes in the front axle. The plug hole is a point on the front axle where grease is inserted to provide lubrication. Oil type for Kubota front axle. Kubota Super UDT Trans-hydraulic oil is a high-quality fluid designed.
I just watched a video for front axle of BX series. Instead of using the UDT, gear oil 80-90 was going to be used.. From Kubota Lubricant and Maintenance tables, UDT or 80-90 gear oil is acceptable. I just completed my 600 hour maintenance on the M7040 and went with the gear oil.. A good rule of thumb is to never change from one type of.. Front axle lubricant change. Front axle capacity: 5.0 qts (4.7 L). Annual Maintenance Kubota BX2350 replacement parts Engine Air Filter. Part Number: K1211-82320 Engine Oil Filter. Part Number: HH150-32430 Engine Fuel Filter Element. Part Number: 12581-43012 Drive Belt. Part Number: 16883-97010 Hydraulic Filter. Part Number: K2581-36520.