Resetting The Ring Indoor Camera And Stick Up Cam Elite. Step 1: Locate the orange setup button at the top of the camera (for the Indoor Cam) or under the cover at the back of the device (for Stick Up Cam Elite) Step 2: Press and hold the setup button for 10 seconds. Step 3: Once the reset is done, the camera will begin Setup Mode. Conclusion. Find the setup button on the top of the camera, or under the cover at the back for Ring Stick Up Cam Elite. Press and hold the setup button for 10 seconds. Once the reset is complete the camera will enter setup mode.
For this type of Ring Stick Up camera, make sure your device is connected to a power outlet while doing the reset. Look for the orange reset button at the back of your camera. Press this button and hold it for about 10 seconds before releasing it. Your camera will turn to setup mode, which means the reset process is finished. 5.. Factory resetting your Ring Stick Up Cam is necessary when troubleshooting connectivity issues, changing ownership, or restoring it to factory settings. This guide will walk you through the process of resetting your Ring Stick Up Cam. Step-by-Step Guide: Locate the Setup Button: Find the setup button on the back of the Ring Stick Up Cam. Press.