The B250-XT headset will operate from battery power or from a USB power source . NOTE: Do not attach the USB cable mid-call. This will cause the headset to reset and the call will be sent back to the phone. When the headset is operating from the battery, all indicator lights and sounds will function as described in this guide .. Step 1: Turn on Your Blueparrott Headset. To begin the process of pairing your BlueParrott headset with your phone, the first step is to turn on your headset. This may seem like a straightforward task, but it's essential to ensure that your headset is powered on and ready to establish a connection with your phone.
Follow the General Pairing Steps: The initial pairing process for the BlueParrott B450-XT is similar to most BlueParrott headsets. Refer to the general steps outlined earlier in this blog post to connect your B450-XT: Power on your B450-XT headset. Activate pairing mode on your headset (consult the user manual for specific instructions).. Placing Headset into Pairing Mode By Voice: Activate headset voice recognition by pressing the Parrott Button or by pressing and holding the Volume Up button . Then, after the prompt, say "pair mode ." The headset will enter pairing mode and be visible for pairing to devices for 120 seconds . Using Buttons: