Car Seat Preparation; Installing the Evenflo Car Seat with LATCH. Step 1: Connect the LATCH Connectors; Step 2: Tighten the LATCH Straps; Step 3: Check for Proper Recline; Step 4: Secure the Tether Strap (If Applicable) Installing the Evenflo Car Seat with a Seat Belt. Step 1: Locate the Seat Belt Path; Step 2: Thread the Seat Belt; Step 3.. Evenflo Car Seat Installation Rear Facing Without Base. Safe Use Checklist / Basic Instruction When Installing Rear-Facing. Ensure the car seat is secured to the vehicle seat. Secure your child in the car seat. The top of the head should be at least 1 inch below the top of the infant seatback.
To install an Evenflo car seat forward facing, follow these steps: 1. Secure the base of the car seat tightly to the vehicle seat using the seat belt. 2. Make sure the car seat is reclined according to the manufacturer's instructions. 3. Thread the seat belt or latch belt through the appropriate slots in the car seat while ensuring it is snug.. To install an Evenflo car seat, follow these steps: adjust the straps, place the seat on the car's backseat, thread the seat belt through the base, secure the seat belt, and check for a tight fit. Installing an Evenflo car seat ensures your child's safety and provides peace of mind during travel.