This configuration guide provides an overview of the automatic self-configuration feature (referred to as Auto-Config) in the ADTRAN Operating System (AOS), and includes the Command Line Interface (CLI) configuration options available for configuring and using Auto-Config in multiple network situations.. Primary Use the following steps to configure the Primary network. 1. In the left menu, select WiFi > Networks. Primary wireless network tab is selected by default. 2. Complete the fields for the primary network configuration, using the information provided in Table 7. 3. Page 18: Managing Connected Devices 1.
The Adtran 854-v6 is a stand-alone router that provides ethernet and wireless connectivity for FTTP services. See our setup video here. Hardware Specifications: Router Only (SFP ONT Interface Enabled) 4 Port Gigabit Ethernet. Dual-band 2.4GHz 802.11ax & 5GHz 802.11ax. Power Adapter 12V - 3A. Web UI Address: Routed mode 192.168.100.1. 04 How to change your wireless channel Our Adtran routers are capable of transmitting and receiving data using both 2.4 GHz and 5 GHz frequencies, either simultaneously or one at a time. The 2.4 and 5 GHz Wi-Fi signal ranges are divided into wireless channels. Each of these wireless channels translates to a specific