TRADER FEEDBACK 0 0 0 TOTAL RATING N/A Members 0 4 posts Locationvancouver bc Report post Posted 6 hours ago Based on old but positive posts on here, I recently bought a HDI electronic boost controller (type D) and am ready to install it. Seems great but I'm not super impressed with the instructi.. HDi SUPER BOOST CONTROLLER - TYPE D Connect the orange wire to HDi BOOST GAUGE (optional$ C02 spray, weter spray or other pressure controlled function) use the arrangement as the diagram (make sure to locate the boost solenoid in a cool area that CAN run shortest vacuum hose'). May 01, · Hey guys approaching every one on here again for i for.
4.) Now time for the wiring of the EBC-R, it came with 1 Harness for power and ground to controller. learning from my Boost gauge experience, i knew that the headlight switch is the easiest 12V source closest to my device location and very close to is was a really good grounding spot on the lower dash. (another reason why i chose that vent). The line coming from the outlet side of the boost controller to the wastegate actuator should be the side the wastegate arrow on the boost controller is pointing, towards the wastegate actuator port. Refer to the "Boost Reference Line Routing" diagram on next page. Secure all hose connections with hose clamps.